Instruments, Controls and Relief for Oil and Gas

Rupture Pin pressure relief valves for separators, refineries, oil and gas production and mud pump relief.

• Separators
• Refineries
• Oil and gas production
• Well drilling mud pump relief

Magnetic level gauges, transmitters and switches for separators, interface and storage.

Products to look at: JMG Magnetic Level GaugeMGT-6000ILT-6000JS-10 / JS-30JP-450

• Separators and oil/water interface
• Slug catchers and surge drums
• Overfill prevention and dump/fill control

Series 1500 and 2500 safety relief valves for air/gas and liquid service, with NACE options.

Fixed and wireless detection of hydrogen sulfide and combustible gases at wells, tanks and compressor stations.

Products to look at: SenSmart 6000 SeriesSenSmart 7000 SeriesWaveNet Wireless SystemViewSmart 6400

Gases commonly monitored: Hydrogen SulfideMethanePropaneButaneEthanePentane

• Hydrogen sulfide at oil and gas wells, tanks and compressor stations
• Combustible gas leak detection at tank farms and loading areas

pH, conductivity and optical oxygen measurement for refinery units, natural gas production and produced water.

• Sour water stripper
• Desalter wash water effluent
• Merox process
• Wet gas FCC scrubber
• Natural gas production
• Upstream vapor recovery units
• Hydraulic fracturing water
• SAGD water treatment

Flame and gas detectors plus fire and gas safety systems for platforms, refineries, loading racks and compressor stations.

Products to look at: X3301PointWatch Eclipse PIRECLFlexSight LS2000FlexSonicEagle Quantum Premier

• Offshore platforms and refineries
• Transport loading racks and compressor stations
• LNG terminals and fuel storage

Gauges, hazardous-location transmitters and instrument manifolds for wellheads, frac, vapor recovery and flow.

• Well automation: tubing and casing pressure
• Hammer union pressure on frac, cementing and wireline
• Vapor recovery
• Differential pressure and flow measurement manifolds
• Block, bleed and isolation of critical instruments

Gas phase corrosion control, control room protection and turbine and compressor intake filtration.

• Refinery and petrochemical corrosion control
• Control room and electronics protection
• Gas turbine and compressor intake air

Differential pressure transducers for oil and gas equipment and fuel systems.

• Oil and gas equipment and fuel systems

Process gauges and diaphragm seals for compression skids, oilfield trucks and oil and gas process service.

• Oil and gas process gauges
• Oilfield truck pressures
• Compression skids

Level switches, level controllers, freezeless dump valves and regulators for separators and scrubbers.

• Oil and gas separator liquid dump
• Oilfield scrubber and separator level control
• Liquid-liquid interface control
• Sour service level control (NACE MR0175 wetted materials)

Direct Drive process gauges and diaphragm seal gauges for refineries and severe service.

• Refineries and severe service

Hazardous-location RTD and thermocouple assemblies, thermowells and heat-tracing sensors.

• Extraction, production, refining and distribution
• Heat-traced process piping